Network interface cards for notebooks are typically of the PC-card type.
Notebook computers typically come with PC-card slots than can accommodate a wide range of peripheral devices, including network interface cards (also called a "NIC" or simply a "network card"). A network interface card is a device that allows your computer to communicate with a local area network or connect to a broadband Internet service. The most common network interface cards are wired Ethernet cards and wireless network cards. The installation process is virtually the same for both types of card.Instructions.
Notebook computers typically come with PC-card slots than can accommodate a wide range of peripheral devices, including network interface cards (also called a "NIC" or simply a "network card"). A network interface card is a device that allows your computer to communicate with a local area network or connect to a broadband Internet service. The most common network interface cards are wired Ethernet cards and wireless network cards. The installation process is virtually the same for both types of card.Instructions.
1 Turn the notebook computer off. Locate the PC-card slots on the side of the computer, which are two rectangular bays resting on top of each other. They are each covered by a hinged piece of plastic or metal to keep out dust. Consult your user manual if you are having trouble locating the slots.
2 Insert the end of the network interface card that has the rows of open pinholes on it into either the top or bottom PC-card slot. The label on the card usually faces up. Do not attempt to insert the card between the two slots. Make sure to insert the card straight in and push it firmly to completely seat the card in the slot. 3 Plug the network cable into the end of the network interface card protruding from the side of the computer. If an extension adapter is needed to go between the card and the cable, attach that first to the card, then attach the end of the extension adapter to the network cable. Wireless network interface cards do not require any cables to be plugged into them.
4 Turn the computer on and insert the software or drivers disc that came with the network interface card into the appropriate drive. Run the installation program to load the network interface card drivers and software. Once the installation is complete, you can remove the software and test your network connection.